|
|
Economy and ecology of biomass utilization
Plíšek, Petr ; Špiláček, Michal (referee) ; Pospíšil, Jiří (advisor)
This bachelor thesis deals with an economic and environmental contexts of biomass utilization. The first part focuses on the description of the nature and manner of use of biomass. Another part is focused on economic aspects related to biomass. A necessity in the processing a particular energy source is its ecological problems, that is the third chapter. The last part is devoted to the design condensing heat exchanger and its output relative to the fuel wetness content, and boiler output with a condensing exchanger depending on the combustion products cooling temperature.
|
|
|
Utilization of absorption systems in the heating systems
Vidlák, David ; Špiláček, Michal (referee) ; Pospíšil, Jiří (advisor)
Main goal of this work is familiarization with basic features of absorption heat pumps and it’s growing importance on the market. In the first part of the work there is a research for clarifying facts associated with such pumps. In the introduction there are descriptions of basic information from the field of heating industry and its connections to our systems. Next there is a brief analysis of price changes in electricity and heat in the last five years. Main part of the analytical section is a description of the used absorption system. Second part of the work is focused on the calculation of the absorption system itself. First there is calculated internal and external part of the device according to the parameters from GE Power s.r.o. After this step there are parametric studies based on changes of key parameters of the default device for a demonstration of the behavior of a heating pump. In the end of the work there is a integration of the unit into the heating cycle for variations including flue gas condenser and using a cooling water from the turbine condenser.
|
|
|
Heating of the School Building
Holková, Soňa ; Wierzbická, Helena (referee) ; Vendlová, Lucie (advisor)
The subject of this bachelor's dissertation is heating of the Primary and the Kindergarten school's buildings. The main aim is to make a design of the heating system and the hot water preparation. The source of the heat is the hot-water pipe, which the buildings are connected trough the heating coil to.
|
|
| |
|
|
PřekladačVypnout okamžitý překladPalletizing of the tilting head of a milling multi-purpose machining center with a horizontal spindle axis
Hynšt, Tomáš ; Marek, Tomáš (referee) ; Marek, Jiří (advisor)
This diploma thesis deals with palletization of heavy workpieces that are used by multi-purpose machining centers. The final outcome introduces a suitable option for palletization heavy workpieces of multi-purpose machining centers. In the first part of the thesis is draft of machining centers with parameters which were chosen by exploration of market for selecting suitable solution. The second part of thesis is dealing with a detailed draft palletization made by parts of exploration of market then design palletization system and design pallet changer. The designed construction of pallet changer is dimensioned with help of analytical calculating methods and numerical simulations methods. Outcome palletization system allows automatic change of twenty tons workpieces including pallet between two storage places.
|
|
|
Low-temperature biogas purification
Hřebíček, Martin ; Fiedler, Jan (referee) ; Pospíšil, Jiří (advisor)
The aim of this thesis is the issue of low-temperature cleaning of biogas. He briefly acquaint the reader with the technology of production of biogas and its possible use. Provide requirements for low-temperature treatment and purification of biogas to the needs of downstream equipment. Provide an overview of the possibilities of suitable production systems applicable cold. Develop your own design facilities for low-temperature treatment of biogas
|
|
|
Steam Grate Biomass Boiler
Suchánková, Lenka ; Křemínský, Pavel (referee) ; Lisý, Martin (advisor)
The master's thesis describes the design of the steam boiler, which burns biomass with heat output of 6 MW. The required parameters of the steam are a temperature of 300 °C and a pressure of 2,5 MPa. The thesis is gradually devoted to stoichiometric calculations through heat losses and boiler efficiency, to the design of the combustion chambre, heat exchangers and pressure losses. Part of the thesis is drawing documentation of the boiler.
|
|
|
Application of recent methods for synthesis of heat exchanger network
Kunc, Vlastimil ; Kohoutek, Josef (referee) ; Jegla, Zdeněk (advisor)
Master’s thesis deals with the problems of heat exchanger network synthesis and compare the present methods with emphasis on Pinch Design Method and deterministic method. Based on theoretical formulation of deterministic model the computer program for heat exchanger network synthesis was developed in the software Maple environment. Developed software implementation of deterministic method has been applied to several case studies.
|
|
| |
|
|
The Effect of the Bypass Factor on Design and Geometry of the Evaporator for the Cooling Unit
Vytasil, Michal ; Rubinová, Olga (referee) ; Rubina, Aleš (advisor)
Diploma thesis focuses on effect of the bypass factor on design and geometry of the evaporator for the cooling unit of data centre. Effect of the bypass factor on individual design parameters is solved in detail. All dependendecies are captured by using graphs in which s placed a cement on that parameter. In part C, mathematical and physical solutions are demonstrated calculations and processes leading to the design of the exchanger. In the end, evaluation of the calculations is done and there is also showed possible improvements for the practise.
|
guest ::
